CAT1026WI-42-GT3

CAT1026WI-42-GT3 Overview

It is mounted through 8 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 2 channels. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 2 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. A total of 8 pins are located on this power management. There should be a minimum voltage supply (Vsup) of -2V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 7V volts. The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to -40°C~85°C TA degrees. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. In order to maintain a stable supply current for the power management, 10μA is the recommended value. Additionally, there are many other features that can be found inside of the power management, such as [0]. You can always use CAT1026, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature is 3mA.

CAT1026WI-42-GT3 Features

Multi-Voltage Supervisor type
Minimum supply voltage of -2V
10μA operating supply current

CAT1026WI-42-GT3 Applications

There are a lot of ON Semiconductor CAT1026WI-42-GT3 Voltage Supervisors applications.

• Solar power charger
• Stable power system
• Display equipment
• Radar
• Power distribution systems of CCU
• Leakage protection
• emergency room
• Dash board
• Power distribution systems of operating room
• Battery cars