CAT810TTBI-T3

CAT810TTBI-T3 Overview

As you can see, this power management is mounted through 3 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. The supervisor is always powered by a 3.3V volt supply. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 3. The pins of the power management system count 3. Supply voltage (Vsup) should be at least 1.2V for this power management. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. Supplied with a operating current of 8μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using CAT810, the base power ics number.

CAT810TTBI-T3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
8μA operating supply current

CAT810TTBI-T3 Applications

There are a lot of ON Semiconductor CAT810TTBI-T3 Voltage Supervisors applications.

• Unattended substation automation
• Electrical fire monitoring system
• Refrigeration
• Power distribution systems of infant care room
• Radar
• Battery-powered equipment
• Digitally controlled LDO regulators circuit
• Telecommunications equipment
• Smartphones
• Computer applications