CAT811LTBI-GT3

CAT811LTBI-GT3 Overview

There are 4 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. Please find attached TO-253-4, TO-253AA functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. When a supply voltage of 5V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 4 pins on power management. The pins of the power management system count 4. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The power management's supply current is 8μA. A similar IC managements number of the manufacturer can always be found by using CAT811, the base power ics number. The power management must be powered by 5V volts to function properly.

CAT811LTBI-GT3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
8μA operating supply current

CAT811LTBI-GT3 Applications

There are a lot of ON Semiconductor CAT811LTBI-GT3 Voltage Supervisors applications.

• DSP
• Unattended substation automation
• Important electronics for automotive protection
• Efficient information transmission
• Leakage current detection
• DC stabilized power supply module
• Precision measurement
• Cloud computing
• Battery-powered equipment
• Digitally controlled LDO regulators circuit