CAT823MTDI-GT3

CAT823MTDI-GT3 Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Tape & Reel (TR)-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. IC management is packaged as a SOT-23-5 Thin, TSOT-23-5 package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. During the reflow process, a peak temperature of 260 is specified for the package. During operation, the power ic is supplied with a voltage of 5V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 5 pins on the board. There are 5 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 6μA. A similar IC managements number of the manufacturer can always be found by using CAT823, the base power ics number.

CAT823MTDI-GT3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
6μA operating supply current

CAT823MTDI-GT3 Applications

There are a lot of ON Semiconductor CAT823MTDI-GT3 Voltage Supervisors applications.

• Power distribution systems of infant care room
• Solar power charger
• Display equipment
• Multi-voltage system
• Leakage current detection
• Military communications
• Embedded computing
• Personal computers
• FPGA design
• Data storage applications