CAT823YTDI-GT3

CAT823YTDI-GT3 Overview

A total of 5 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. IC management is packaged as a SOT-23-5 Thin, TSOT-23-5 package. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 2.5V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 5 pins on the board. This power management has 5 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. For this power management, there is an 4μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to CAT823, which is the base power ics number.

CAT823YTDI-GT3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
4μA operating supply current

CAT823YTDI-GT3 Applications

There are a lot of ON Semiconductor CAT823YTDI-GT3 Voltage Supervisors applications.

• Functional modules
• Leakage current detection
• Display equipment
• Fire equipment power monitoring system
• Consumer electronics
• Analog circuit
• Important electronics for automotive safety
• Power communication system
• Smart meter
• Power distribution systems of infant care room