CBTD16211DGG,112

CBTD16211DGG,112 Overview

Due to the fact that it is provided in the 56-TFSOP (0.240, 6.10mm Width), digital switch allows the board to be compacted.As a result, it is packaged in the way of Tube.The method digital switch ic adopts for mounting is Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Several applications are possible for 74CBTD series multiplexers.Among its basic features are 56 terminations.The part number for 74CBTD16211 can be used to find its logic switch related parts as well.The multiplexer's system works with 5V voltage.In this turn signal switch, there are 56 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.The supply type of this multiplexer ic is Single.With 56 pins, it is configured.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer provides 24 bits.Without external influences, it consumes 1.5mA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.2 is the resistance at which it operates.The resistance of the signal switching is 35Ohm.

CBTD16211DGG,112 Features

Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V

CBTD16211DGG,112 Applications

There are a lot of Nexperia USA Inc. CBTD16211DGG,112 Signal Switches / Multiplexers / Decoders applications.

• Enabling different rows of memory depending on address in memory chips
• Automation system
• Steel plants
• Injectors
• Make half adder
• Microprocessor instruction decoding
• Frequency multiplexing system
• Data distribution
• Recording transmission
• Microprocessor memory systems