CD40102BE

CD40102BE Overview

This device is packaged in a 16-DIP (0.300, 7.62mm) package. Using 16terminations, it can be configured. The supply voltage of 5V enables it operate in a fully flexible way. The device has 2terminations. In total, there are 16pins on the component. It is packaged in a manner consistent with Tube. In the circuit, there are 16pins that connect other parts. It is mounted using the way of [0]. Due to the fact that it is a member of the 4000Bseries, it has a wide range of applications. It is decided to use the logic type [0]. In this case, the operating temperature should be set to -55°C~105°C. In this case, it is mounted with a Through Holetype. By providing the supply voltage of [0], it is capable of operating more reliably. The array stores 4bits in each element. In this device, there is information of 1bits. This electronic device is equipped with the following features [0]. Its base part number, [0], contains more related parts. As low as 3V Vsup is the minimum supply voltage. The frequency of the device is 4.8MHz. The current consumed is 100μA when there are no external factors.

CD40102BE Features

Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
TCO OUTPUT; RESET TO MAX COUNT
Frequency of 4.8MHz

CD40102BE Applications

There are a lot of Texas Instruments CD40102BE Counters & Dividers applications.

• MULTIPLICATION
• SQUARING
• Divide-by-N counting
• Frequency dividing circuits
• counting/frequency sy nthesizers-BCD output
• Programmable decade counters
• ANALOG SIGNAL PROCESSING
• Frequency dividers
• Fixed or Programmable Frequency Division
• Communications Digital Frequency Synthesizers;