CD4016BM96G4

CD4016BM96G4 Overview

Due to the lack of space on the board, digital switch is provided in the SOIC.Tape and Reel is the packaging method.There is a design for terminating 14 as part of its basic configuration.The multiplexer is supplied with 5V voltage.This turn signal switch has a total of 14 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.The supply type of this multiplexer ic is Dual, Single.This multiplexer ic has 14 pins configured.The mount is in Surface Mount.There are 1 bits in signal multiplexer.The digital switch ic is a part of an electronic system classified as Multiplexer or Switches.In this multiplexer, there is a total of 4 inputs.With a resistance of 2kOhm, it operates.This turn signal switch's circuit is based on a circuit with 1 channels.The maximum operating temperature of 125°C is acceptable for this signal switch.The minimal operating temperature of the multiplexer should be maintained at -55°C.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 18V.According to its specifications, the digital swith requires a minimum supply voltage of 3V.In this digital switch, the analog integrated circuit is SPST.

CD4016BM96G4 Features

Supplied in the SOIC package
Adopting a supply type of Dual, Single
SPST as the analog IC

CD4016BM96G4 Applications

There are a lot of Texas Instruments CD4016BM96G4 Signal Switches / Multiplexers / Decoders applications.

• Audio transmission
• Telephone network
• Transmission from the computer system of a satellite
• Data bus control
• Enabling different functions units in microprocessor instruction decoding
• A robotic vehicle with the metal detector
• Solenoid cooling fan
• VGA
• Frequency multiplexing system
• Encrypted communications system