CD40174BE

CD40174BE Overview

It is embeded in 16-DIP (0.300, 7.62mm) case. A package named Tubeincludes it. The output it is configured with uses Non-Inverted. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 3V~18V volts. -55°C~125°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 4000Bseries FPGA. You should not exceed 16MHzin the output frequency of the device. There are 1 elements in it. As a result, it consumes 4μA quiescent current and is not affected by external forces. A total of 16terminations have been recorded. D latch belongs to the CD40174 family. It is powered by a voltage of 5V . Its input capacitance is 5pF farads. A part of the electronic system is mounted in the way of Through Hole. The 16pins are designed into the board. A Positive Edgeclock edge trigger is used in this device. This device is part of the FF/Latchesbase part number family. An electronic part with 6bits has been designed. For normal operation, the supply voltage (Vsup) should be above 3V. In order to achieve its superior flexibility, 7 circuits are used. With a current output of 6.8mA , it offers maximum design flexibility. It operates with 6 output lines. Despite external influences, it consumes 20μAof quiescent current. There are 4 channels available.

CD40174BE Features

Tube package
4000B series
16 pins
6 Bits

CD40174BE Applications

There are a lot of Texas Instruments CD40174BE Flip Flops applications.

• Counters
• Matched Rise and Fall
• Reduced system switching noise
• Supports Live Insertion
• Data transfer
• Storage registers
• Consumer
• Frequency Divider circuits
• Cold spare funcion
• Data storage