CD4027BPWR

CD4027BPWR Overview

It is packaged in the way of 16-TSSOP (0.173, 4.40mm Width). It is included in the package Cut Tape (CT). It is configured with Differentialas an output. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Surface Mount. The supply voltage is set to 3V~18V. In this case, the operating temperature is -55°C~125°C TA. It is an electronic flip flop with the type JK Type. FPGAs belonging to the 4000Bseries contain this type of chip. There should be no greater frequency than 24MHzon its output. During its operation, it consumes 4μA quiescent energy. There are 16 terminations,If you search by CD4027, you will find similar parts. Power is supplied from a voltage of 5V volts. A JK flip flop with a 5pFfarad input capacitance is used here. In this case, the electronic component is mounted in the way of Surface Mount. 16pins are included in its design. Its clock edge trigger type is Positive Edge. The part is included in FF/Latches. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 3V. Its superior flexibility is attributed to its use of 2 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. It consumes a total of 20μA quiescent current at any given time.

CD4027BPWR Features

Cut Tape (CT) package
4000B series
16 pins

CD4027BPWR Applications

There are a lot of Texas Instruments CD4027BPWR Flip Flops applications.

• ESD performance
• Single Down Count-Control Line
• Clock pulse
• Control circuits
• Functionally equivalent to the MC10/100EL29
• Divide a clock signal by 2 or 4
• Automotive
• Patented noise
• Matched Rise and Fall
• Cold spare funcion