CD4076BPW

CD4076BPW Overview

The package is in the form of 16-TSSOP (0.173, 4.40mm Width). D flip flop is embedded in the Tube package. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 3V~18Vsupply voltage is required for it to operate. It is operating at -55°C~125°C TA. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the 4000B series. It should not exceed 16MHzin its output frequency. The element count is 1 . It consumes 20μA of quiescent current without being affected by external factors. A total of 16 terminations have been made. The CD4076 family contains this object. An input voltage of 5Vpowers the D latch. JK flip flop input capacitance is 5pF farads. The electronic part is mounted in the way of Surface Mount. There are 16pins on it. There is a clock edge trigger type of Positive Edgeon this device. The part you are looking for is included in FF/Latches. There are 4bits in its design. A normal operating voltage (Vsup) should remain above 3V. Featuring the maximum design flexibility, it has an output current of 6.8mA . 4input lines are available for you to choose from. This D latch consumes 100μA quiescent current at all.

CD4076BPW Features

Tube package
4000B series
16 pins
4 Bits

CD4076BPW Applications

There are a lot of Texas Instruments CD4076BPW Flip Flops applications.

• Data transfer
• High Performance Logic for test systems
• Memory
• Data Synchronizers
• Balanced 24 mA output drivers
• 2 – Bit synchronous counter
• Instrumentation
• Modulo – n – counter
• ESD protection
• Communications