CD4724BCN

CD4724BCN Overview

The 16-DIP (0.300, 7.62mm) package contains it. Tube is the way in which it is packaged. It uses Standard as the output. There is a logic type of D-Type, Addressable for this electrical device. Electronic components are mounted using the Through Hole method. In order for it to operate, it needs a supply voltage of 3V~15V. The temperature at which the machine is operating is -55°C~125°C. The 4000B series of FPGAs is the one this FPGA belongs to. Electronic parts with 8 bits are designed for this application. As a member of the 4724 family, it falls under that category. The 16 pins are designed into it. The electronic part is mounted using the Through Hole method. Electronic circuits are represented by 1 input lines. Its 8.8mA output current allows for maximum design flexibility. It follows that 8 output lines are generated from the binary equivalent of the input line. Without external influences, it consumes 20nA quiescent current. A total of 1 elements are contained in it. To achieve its exceptional flexibility, it relies on 1 circuits. The low level output current is set to 8.8mA. -4.2mA is set as the high level output current. Lower than 125°C is the recommended operating temperature. In order for the system to operate properly, the operating temperature should be higher than -55°C. It supports a maximum supply voltage of 15V. A voltage of 3V is the minimum supply voltage required for it to operate.

CD4724BCN Features

16-DIP (0.300, 7.62mm) package
4000B series
8 Bits
4724 family
16 pins
1 elements

CD4724BCN Applications

There are a lot of ON Semiconductor CD4724BCN Latches applications.

• Frequency dividing
• Serial Output Data Queuing
• Decade counting 7-segment decimal display
• Storage
• Shift Registers
• Programmable binary
• Registers
• Parallel data storage
• Stacked or Push-Down Registers
• Parallel Output