CD74AC08E

CD74AC08E Overview

As the part is packed in 14-DIP (0.300, 7.62mm), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. A AND Gate logic principle is used to make it work. A voltage of 1.5V~5.5V is required for the part to function properly. Operating temperature extended to -55°C~125°C. There is Through Hole mounting in Through Hole. The high and low state of output current is 24mA 24mA. This is part of the 74AC series. A total of 14 terminations have been recorded. This part is equipped with 4 functions that will greatly enhance the user's experience. As part of AC, this chip is used. Try searching with 74AC08 if you're looking for device variants. An injection of 14 pins is performed into the body of the part. This logic device is widely used in a wide variety of applications because it is Through Hole mounted. For functions related to 14 pins, please refer to the datasheets. The part supports 2 inputs. Quiescent parts have 4μA current flowing through them. This logic device is a typical Gates. In this part, the load capacitance is 50pF. The supply voltage should not exceed 5.5V. According to the datasheets, the part requires 3.3/5V power supplies. The device's output current is rated 24mA. A device with 1 outputs is available. There are a total of 4 elements used in the operation.

CD74AC08E Features

AND Gate Logic Type
Operating Temperature: -55°C~125°C
AC Family
Quiescent Current: 4μA
Output Current: 24mA

CD74AC08E Applications

There are a lot of Texas Instruments CD74AC08E Gates and Inverters applications.

• Overvoltage and undervoltage protection
• Agriculture and light complementary power station
• Fan
• Overcurrent/Short circuit protection
• Pocket PC
• Urban rail vehicle
• Solar street light
• Induction cooker
• Car refrigerator
• CD player