CD74AC273M96

CD74AC273M96 Overview

It is embeded in 20-SOIC (0.295, 7.50mm Width) case. A package named Cut Tape (CT)includes it. T flip flop is configured with an output of Non-Inverted. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. It operates with a supply voltage of 1.5V~5.5V. A temperature of -55°C~125°C TAis used in the operation. This logic flip flop is classified as type D-Type. JK flip flop is a part of the 74ACseries of FPGAs. This D flip flop should not have a frequency greater than 100MHz. There are 1 elements in it. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74AC273 family. It is powered from a supply voltage of 3.3V. JK flip flop input capacitance is 10pF farads. A device of this type belongs to the family of AC. A part of the electronic system is mounted in the way of Surface Mount. The 20pins are designed into the board. Its clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. There are 8bits in this flip flop. The maximal supply voltage (Vsup) reaches 5.5V. Due to its superior flexibility, it uses 8 circuits. As a result of its reliable performance, this T flip flop is suitable for TR. A total of 3.3/5V power supplies are needed to run it. The output current of 24mA makes it feature maximum design flexibility. There is 8μA quiescent current consumption by it.

CD74AC273M96 Features

Cut Tape (CT) package
74AC series
20 pins
8 Bits
3.3/5V power supplies

CD74AC273M96 Applications

There are a lot of Texas Instruments CD74AC273M96 Flip Flops applications.

• Frequency Divider circuits
• Count Modes
• Patented noise
• Convert a momentary switch to a toggle switch
• Consumer
• Storage registers
• Memory
• Parallel data storage
• Circuit Design
• Computing