CD74AC534M96

CD74AC534M96 Overview

20-SOIC (0.295, 7.50mm Width)is the packaging method. Package Cut Tape (CT)embeds it. T flip flop uses Tri-State, Invertedas its output configuration. This trigger uses the value Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 1.5V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74ACseries of FPGAs. You should not exceed 125MHzin the output frequency of the device. D latch consists of 1 elements. The number of terminations is 20. Members of the 74AC534family make up this object. A voltage of 3.3V provides power to the D latch. Its input capacitance is 10pFfarads. A device of this type belongs to the family of AC. A part of the electronic system is mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device has the clock edge trigger type of Positive Edge. This part is included in FF/Latches. The design is based on 8bits. As soon as 5.5Vis reached, Vsup reaches its maximum value. Despite its superior flexibility, it relies on 8 circuits to achieve it. Considering the reliability of this T flip flop, it is well suited for TR. The D flip flop is embedded with 2ports. As a result of its output current of 24mA, it is very flexible in terms of design. The JK flip flop is with 3 output lines to operate. Quiescent current is consumed by the D latch in the amount of 8μA.

CD74AC534M96 Features

Cut Tape (CT) package
74AC series
20 pins
8 Bits

CD74AC534M96 Applications

There are a lot of Texas Instruments CD74AC534M96 Flip Flops applications.

• Control circuits
• Clock pulse
• Data storage
• Computers
• Shift Registers
• Registers
• Frequency division
• Load Control
• Balanced 24 mA output drivers
• ESCC