CD74AC74M

CD74AC74M Overview

In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. There is an embedded version in the package Tube. Currently, the output is configured to use Differential. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. With a supply voltage of 1.5V~5.5V volts, it operates. Temperature is set to -55°C~125°C TA. It belongs to the type D-Typeof flip flops. In terms of FPGAs, it belongs to the 74AC series. There should be no greater frequency than 110MHzon its output. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. You can search similar parts based on 74AC74. It is powered by a voltage of 3.3V . The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of AC. A part of the electronic system is mounted in the way of Surface Mount. A total of 14pins are provided on this board. This device has the clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It reaches the maximum supply voltage (Vsup) at 5.5V. The superior flexibility is achieved through the use of 2 circuits. There are 3.3/5V power supplies attached to it. The output current of 24mA makes it feature maximum design flexibility. In order for the chip to function, it has 1output lines. In terms of quiescent current, it consumes 4μA .

CD74AC74M Features

Tube package
74AC series
14 pins
3.3/5V power supplies

CD74AC74M Applications

There are a lot of Texas Instruments CD74AC74M Flip Flops applications.

• Individual Asynchronous Resets
• High Performance Logic for test systems
• Parallel data storage
• Matched Rise and Fall
• Circuit Design
• EMI reduction circuitry
• Storage Registers
• Divide a clock signal by 2 or 4
• Bounce elimination switch
• Latch-up performance