CD74ACT174M96

CD74ACT174M96 Overview

It is packaged in the way of 16-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tape & Reel (TR) package. There is a Non-Invertedoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. In this case, the operating temperature is -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74ACT series. Its output frequency should not exceed 80MHz Hz. There are 1 elements in it. It consumes 8μA of quiescent There have been 16 terminations. A voltage of 5V provides power to the D latch. Its input capacitance is 10pF farads. An electronic device belonging to the family ACTcan be found here. Vsup reaches its maximum value at 5.5V. The supply voltage (Vsup) should be kept above 4.5V for normal operation.

CD74ACT174M96 Features

Tape & Reel (TR) package
74ACT series

CD74ACT174M96 Applications

There are a lot of Rochester Electronics, LLC CD74ACT174M96 Flip Flops applications.

• Power down protection
• Functionally equivalent to the MC10/100EL29
• QML qualified product
• Digital electronics systems
• Bus hold
• Individual Asynchronous Resets
• Single Up Count-Control Line
• Divide a clock signal by 2 or 4
• Circuit Design
• Storage registers