CD74ACT174M96E4

CD74ACT174M96E4 Overview

In the form of SOIC, it has been packaged. There is an embedded version in the package Tape & Reel (TR). There are 1 elements in it. It has been determined that there have been 16 terminations. It is powered by a voltage of 5V . Devices in the ACTfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. Its flexibility is enhanced by 7 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The power supply is 5V. For high efficiency, the supply voltage should be set to 5V. This D latch consumes 8μA quiescent current at all. There is -24mA output current at the high level. There is 24mA output current at the low level. Ideally, the operating temperature should be lower than 125°C. Ideally, the operating temperature should be greater than -55°C. Normally, it operates with a voltage of 4.5VV as its minimum supply voltage. There is a maximum voltage support of 5.5V. This can be achieved at a frequency of 80MHz. The logic IC it uses is D FLIP-FLOP. It is equipped with 1 Functions . There are 16 pins on the D latch. It offers maximum design flexibility with its output current of 24mA.

CD74ACT174M96E4 Features

Tape & Reel (TR) package
16 pins
5V power supplies
1 Functions
16 pin count

CD74ACT174M96E4 Applications

There are a lot of Texas Instruments CD74ACT174M96E4 Flip Flops applications.

• Control circuits
• Functionally equivalent to the MC10/100EL29
• Single Up Count-Control Line
• Communications
• Event Detectors
• Set-reset capability
• Computers
• QML qualified product
• Differential Individual
• CMOS Process