CD74ACT273E

CD74ACT273E Overview

It is packaged in the way of 20-DIP (0.300, 7.62mm). The package Tubecontains it. In the configuration, Non-Invertedis used as the output. It is configured with a trigger that uses Positive Edge. Through Holeis in the way of this electric part. The supply voltage is set to 4.5V~5.5V. A temperature of -55°C~125°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74ACTseries contain this type of chip. You should not exceed 85MHzin its output frequency. In total, it contains 1 elements. There is 8μA quiescent consumption. A total of 20terminations have been recorded. The 74ACT273 family contains it. It is powered from a supply voltage of 5V. Input capacitance of this device is 10pF farads. It is a member of the ACTfamily of D flip flop. This electronic part is mounted in the way of Through Hole. 20pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. An electronic part with 8bits has been designed. Its superior flexibility is attributed to its use of 8 circuits. A total of 5V power supplies are needed to run it. For high efficiency, the supply voltage should be set to 5V. As a result of its output current of 24mA, it is very flexible in terms of design. In order to operate, the chip has 4 output lines.

CD74ACT273E Features

Tube package
74ACT series
20 pins
8 Bits
5V power supplies

CD74ACT273E Applications

There are a lot of Texas Instruments CD74ACT273E Flip Flops applications.

• Frequency Dividers
• QML qualified product
• Modulo – n – counter
• Registers
• Automotive
• ESD performance
• Pattern generators
• Differential Individual
• High Performance Logic for test systems
• Circuit Design