CD74ACT283ME4

CD74ACT283ME4 Overview

In the SOICpackage, it is supplied. In order to configure it, it uses 16terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. There are a total of 16 pins in all components. Rail/Tubeis used to package it. In the circuit, there are 16pins that connect other parts. It is mounted in the direction of [0]. The ACTfamily includes it. There is information in the device in the form of 4bits. Pbfree code may result in yes. In regard to this electronic device, FULL ADDER; WITH INTERNAL CARRY LOOKAHEADare essential features. The temperature grade of this device is MILITARY. There is 5V voltage comes from the voltage source. To operate, it requires a supply voltage of [0]. Electrical characteristics are stable at temperature 125°Cfor extended periods of time. Temperature ranges are specified, with -55°Cset as a lower limit. It reaches 5.5Vvoltage at its maximum. There is a minimum voltage available for the device of 4.5V. There is a quiescent current consumption at 8μA. In this case, the electronic components belong to the family of [0]. It uses the logic IC type [0]. In the case of a specified high-level voltage, there is -24mA current flowing into the output. At a specified low-level voltage, there is 24mA current flowing into the output terminal. In this case, the 1channels serve as the basis for the configuration.

CD74ACT283ME4 Features

Embedded in the SOIC package
FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD
Operating supply voltage of 5V
ADDER/SUBTRACTOR as logic IC type

CD74ACT283ME4 Applications

There are a lot of Texas Instruments CD74ACT283ME4 Counters & Dividers applications.

• Time-delay circuits
• TRUE RMS-TO-DC CONVERSION
• Timing applications
• Digital multiplexing and demultiplexing
• POWER COMPUTATION
• Programmable decade counters
• Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
• Control counters
• SQUARING
• Analog multiplexing and demultiplexing