CD74ACT373MG4

CD74ACT373MG4 Overview

It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. Tube is the packaging method. Tri-State is used for the output it is configured with. In this electrical device, the logic type is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. It is -55°C~125°C at the operating temperature. In the 74ACT series, this FPGA is located. This electronic part is designed with 8 Bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. 74ACT373 is its family. With a supply voltage of 5V, it operates. It has 20 pins that makes it easy to use. There is a device in this electronic family called ACT. 20 pins are used in its design. Surface Mount is the way in which this electronic part is mounted. In this device, there is a total of 2 ports available for use. The part belongs to the FF/Latches subcategory. It operates from 5V power supplies. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Due to its 24mA output current, it offers maximum design flexibility. In order to achieve high efficiency, the supply voltage should be kept at 5V. As far as external factors are concerned, it consumes 8μA of quiescent current without getting affected by them. When the maximum power current (ICC) is supplied for its operation, it reaches 0.04mA.

CD74ACT373MG4 Features

20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies

CD74ACT373MG4 Applications

There are a lot of Texas Instruments CD74ACT373MG4 Latches applications.

• Buffer Storage
• A/D and D/A conversion
• Counter
• Counter control
• Parallel data storage
• Lamp and Display (LED)
• Stacked or Push-Down Registers
• Digital bus buffer
• Meter applications
• Network Switches