CD74ACT374E

CD74ACT374E Overview

20-DIP (0.300, 7.62mm)is the packaging method. There is an embedded version in the package Tube. This output is configured with Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Through Hole. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of -55°C~125°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74ACT series. A frequency of 110MHzshould not be exceeded by its output. There are 1 elements in it. It has been determined that there have been 20 terminations. You can search similar parts based on 74ACT374. Power is provided by a 5V supply. Input capacitance of this device is 10pF farads. The electronic device belongs to the ACTfamily. The electronic part is mounted in the way of Through Hole. The electronic flip flop is designed with pins 20. In this device, the clock edge trigger type is Positive Edge. The part is included in FF/Latches. Flip flops designed with 8bits are used in this part. Despite its superior flexibility, it relies on 8 circuits to achieve it. A power supply of 5Vis required to operate it. The D flip flop is embedded with 2ports. In order to achieve high efficiency, the supply voltage should be maintained at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. It operates with 3 output lines. This D latch consumes 8μA quiescent current at all.

CD74ACT374E Features

Tube package
74ACT series
20 pins
8 Bits
5V power supplies

CD74ACT374E Applications

There are a lot of Texas Instruments CD74ACT374E Flip Flops applications.

• ESD protection
• Differential Individual
• Event Detectors
• Computing
• Balanced 24 mA output drivers
• Count Modes
• Divide a clock signal by 2 or 4
• ESD performance
• Memory
• Single Up Count-Control Line