CD74HC109E

CD74HC109E Overview

16-DIP (0.300, 7.62mm)is the way it is packaged. Package Tubeembeds it. There is a Differentialoutput configured with it. This trigger uses the value Positive Edge. It is mounted in the way of Through Hole. The JK flip flop operates at a voltage of 2V~6V. A temperature of -55°C~125°C TAis used in the operation. This D latch has the type JK Type. In FPGA terms, D flip flop is a type of 74HCseries FPGA. You should not exceed 60MHzin its output frequency. There have been 16 terminations. This D latch belongs to the family of 74HC109. It is powered from a supply voltage of 4.5V. A JK flip flop with a 10pFfarad input capacitance is used here. This D flip flop belongs to the family of HC/UH. There is an electronic component mounted in the way of Through Hole. This board has 16 pins. The clock edge trigger type for this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. In this case, the maximum supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be maintained above 2V for normal operation. This T flip flop features a maximum design flexibility due to its output current of 5.2mA. There is a consumption of 4μAof quiescent current from it. Currently, there are 2 channels available.

CD74HC109E Features

Tube package
74HC series
16 pins

CD74HC109E Applications

There are a lot of Texas Instruments CD74HC109E Flip Flops applications.

• Instrumentation
• Single Down Count-Control Line
• ESD protection
• Data Synchronizers
• Balanced 24 mA output drivers
• Communications
• Shift Registers
• Bounce elimination switch
• EMI reduction circuitry
• Control circuits