CD74HC10MT

CD74HC10MT Overview

Due to its 14-SOIC (0.154, 3.90mm Width) packaging, the part is convenient for international shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. A NAND Gate logic principle is used to make it work. In order for the part to function correctly, a voltage of 2V~6V is required. The operating temperature is extended to around -55°C~125°C. A Surface Mount mount is used for this part. The high and low state of output current is 5.2mA 5.2mA. 74HC is the series it belongs to. There are 14 terminations totally. This part is equipped with 3 functions that will greatly enhance the user's experience. It is part of the HC/UH family of chips. Use 74HC10 when searching for device variants. A total of 14 pins are injected into the part body. Many applications include this logic device with a Surface Mount mounting. You can find the functions of the 14 pins in the datasheets. The part has 2μA current flowing through it in the quiescent state. The logic device is a typical Gates. There is 50pF load capacitance on the part. The device must be supplied with a minimum voltage of 2V. In this case, Vsup reaches its maximum value. It includes the industry TAPE AND REEL method. A 2/6V power supply is specified in the datasheet for this part. A device with an output current of 5.2mA is rated. 1 outputs are included in the device. The operation uses 3 elements in total.

CD74HC10MT Features

NAND Gate Logic Type
Operating Temperature: -55°C~125°C
HC/UH Family
Quiescent Current: 2μA
Output Current: 5.2mA

CD74HC10MT Applications

There are a lot of Texas Instruments CD74HC10MT Gates and Inverters applications.

• Illumination
• Solar street light
• Solar energy generation
• Scanner
• Residual current/leakage current protection
• Car
• Small ground power station
• Fan
• Refrigerator
• Hair dryer