CD74HC112PW

CD74HC112PW Overview

The flip flop is packaged in 16-TSSOP (0.173, 4.40mm Width). D flip flop is embedded in the Tube package. As configured, the output uses Differential. This trigger is configured to use Negative Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~6V volts. A temperature of -55°C~125°C TAis considered to be the operating temperature. The type of this D latch is JK Type. This type of FPGA is a part of the 74HC series. You should not exceed 60MHzin the output frequency of the device. It has been determined that there have been 16 terminations. The 74HC112family includes it. Power is provided by a 4.5V supply. The input capacitance of this JK flip flopis 10pF farads. An electronic device belonging to the family HC/UHcan be found here. A part of the electronic system is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Negative Edge. The RS flip flops belongs to FF/Latch base part number. There is a 6Vmaximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be kept above 2V. The superior flexibility of this product is achieved by using 2 circuits. With an output current of 5.2mA, this device offers maximum design flexibility. It consumes a total of 4μA quiescent current at any given time.

CD74HC112PW Features

Tube package
74HC series
16 pins

CD74HC112PW Applications

There are a lot of Texas Instruments CD74HC112PW Flip Flops applications.

• Latch-up performance
• Count Modes
• Clock pulse
• Power down protection
• Single Down Count-Control Line
• ESD protection
• Consumer
• Frequency Dividers
• QML qualified product
• Data transfer