CD74HC112PWR

CD74HC112PWR Overview

The item is packaged in 16-TSSOP (0.173, 4.40mm Width)cases. You can find it in the Cut Tape (CT)package. The output it is configured with uses Differential. This trigger is configured to use Negative Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. In the operating environment, the temperature is -55°C~125°C TA. It belongs to the type JK Typeof flip flops. In FPGA terms, D flip flop is a type of 74HCseries FPGA. You should not exceed 60MHzin the output frequency of the device. Terminations are 16. JK flip flop belongs to 74HC112 family. A voltage of 4.5V provides power to the D latch. JK flip flop input capacitance is 10pF farads. It belongs to the family of electronic devices known as HC/UH. A part of the electronic system is mounted in the way of Surface Mount. The 16pins are designed into the board. There is a clock edge trigger type of Negative Edgeon this device. It is part of the FF/Latchesbase part number family. 6Vis the maximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 2V. Its superior flexibility is attributed to its use of 2 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TR. With an output current of 5.2mA, it is possible to design the device in any way you want. There is 4μA quiescent current consumption by it.

CD74HC112PWR Features

Cut Tape (CT) package
74HC series
16 pins

CD74HC112PWR Applications

There are a lot of Texas Instruments CD74HC112PWR Flip Flops applications.

• Bus hold
• Modulo – n – counter
• Balanced Propagation Delays
• Computers
• Balanced 24 mA output drivers
• Dynamic threshold performance
• Counters
• Matched Rise and Fall
• Functionally equivalent to the MC10/100EL29
• Divide a clock signal by 2 or 4