CD74HC11M96

CD74HC11M96 Overview

The part can be shipped overseas conveniently because it is packaged in 14-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Cut Tape (CT). As a result, it works on the principle of AND Gate. A voltage of 2V~6V is needed to ensure full function of the part. The operating temperature is extended to around -55°C~125°C. Part Surface Mount is mounted. Output current is 5.2mA 5.2mA in the high and low states. The number 74HC refers to it. Total terminations are 14. It has 3 functions that enhance user experience significantly. HC/UH is a chip that is part of this device. Try searching with 74HC11 if you're looking for device variants. The part body receives 14 pins. There are many applications for this logic device, mounted at Surface Mount. The functions of 14 pins can be found in the datasheets. It has 2μA current flowing through it when it is quiescent. In this logic device, the value is Gates. In this part, the load capacitance is 50pF. The device must be supplied with a minimum voltage of 2V. The supply voltage should not exceed 6V. The industry TR method is included. According to the datasheet, the part requires 2/6V power supply. In this case, the output current is rated as 5.2mA. A device with 1 outputs is available. There are a total of 3 elements used in the operation.

CD74HC11M96 Features

AND Gate Logic Type
Operating Temperature: -55°C~125°C
HC/UH Family
Quiescent Current: 2μA
Output Current: 5.2mA

CD74HC11M96 Applications

There are a lot of Texas Instruments CD74HC11M96 Gates and Inverters applications.

• Troubleshooting & Judgment
• Induction cooker
• VCR
• Hair dryer
• Printer
• Residual current/leakage current protection
• Communication
• VCD
• Electric grinding wheel
• Electricity for military and civilian life in areas without electricity