CD74HC123E

CD74HC123E Overview

16-DIP (0.300, 7.62mm) cases package it.Multivibrator is advised to pack the equipment in case of Tube.The recommended mounting type is Through Hole.Part Monostable includes logic type Monostable.Multivibrator is supplied votage wMultivibratorhin 2V~6V.These electrical components can be found in the 74HC series.There must not be a minimum operating temperature of -55°C~125°C for this part.Multivibrator causes 5.2mA 5.2mA low,high output current.In this component, the 74HC123 family is used as the basis for design.There are a total of 16 terminations.Multivibrator is capable of handling voltages up to 4.5V.Data or clock inputs are available on 2 inputs.There are a total of six 16 pins on the part.It belongs to HC/UH family.Parts of the part have 16 pins.There is a Through Hole which mounts the device.Multivibrator is necessary to have a higher minimum supply voltage than 2V.8μA consumes quiescent current.To function properly, this chip requires a voltage supply of 5V volts.For the chip to operate properly, a voltage supply of 6V volts needs to be provided to it.A device can be supplied with a current of output named 5.2A if the output voltage is set appropriately.2 is the total number of bits on an IC chip.Additional features of the part can be found by searching: RETRIGGERABLEUsing the 0.08mA setting would be best for power supply current.

CD74HC123E Features

in 16-DIP (0.300, 7.62mm) package
Mounting Type: Through Hole
Logic Type: Monostable
Operating Temperature: 74HC
based on 74HC123
Supply Voltage: 4.5V
Quiescent Current at 8μA
output current at 5.2A
2 bits

CD74HC123E Applications

There are a lot of Texas Instruments CD74HC123E applications of multivibrators.

• AV Receivers
• Frequency discriminators
• Pulse shaping
• DVD Recorders and Players
• Video Analytics Servers
• Digital Radio and Internet Radio Players
• Desktop PCs or Notebook PCs
• Embedded PCs
• Puls delay and timing
• Astable multivibrator