CD74HC147PWT

CD74HC147PWT Overview

It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.In this case, it is packaged as Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.As the analog part, the circuit uses an analog IC Priority Encoder.The operating temperature of -55°C~125°C will not be susceptible to external factors.With a supply voltage of 2V~6V, designers have greater flexibility of digital controlled switch.Multiplexers from the 74HC series can be used in a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.The part number for 74HC147 can be used to find its logic switch related parts as well.The multiplexer's system is supplied with a voltage of 4.5V.This turn signal switch contains 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.In the HC/UH family, the logic switch is included.Signal multiplexer provides 9 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.mux switch's normal operation requires the power supply of 2/6V.The part belongs to the Arithmetic Circuits category of signal switches.The signal switching is packaged by TR.

CD74HC147PWT Features

Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Power supplies of 2/6V

CD74HC147PWT Applications

There are a lot of Texas Instruments CD74HC147PWT Signal Switches / Multiplexers / Decoders applications.

• High-performance memory systems
• Microprocessor input/output systems
• Idle motor
• War field flying robot with a night vision flying camera
• Automatic Monitoring systems
• Electronics industry
• Enabling different rows of memory depending on address in memory chips
• Make full adder
• Analog to digital conversion
• Make half adder