CD74HC163M96

CD74HC163M96 Overview

In the 16-SOIC (0.154, 3.90mm Width)package, it is supplied. It is configured with 16terminations. Having a supply voltage of 4.5V enables to operate in a fully flexible manner. The 1elements are connected by wires. In all, there are 16 pins on each component. Tape & Reel (TR)is used to package it. In the circuit, there are 16pins that connect other parts. The device is mounted in the direction of [0]. The HC/UHfamily is derived from it. The 74HCseries offers a wide range of applications due to its versatility. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to -55°C~125°C. The mounting type is Surface Mount. As a result, the device operates more reliably when a supply voltage of 2V~6Vis applied. The array consists of elements storing 4bits each. The result may be yesin terms of Pbfree code. Among the features of this electronic device, TCO OUTPUTare essential. Further related parts may be found under the base part number 74HC163. In order to pack the product, TRis employed. From the voltage source, there is 2/6Vvoltage. There is a minimum supply voltage (Vsup) of 2V volts. It operates with the frequency of 35MHz. Typically, the supply voltage (Vsup) is limited to 6V. Quiescent current is consumed at 8μA.

CD74HC163M96 Features

Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
TCO OUTPUT
Frequency of 35MHz

CD74HC163M96 Applications

There are a lot of Texas Instruments CD74HC163M96 Counters & Dividers applications.

• Timing applications
• Clocks
• Fixed and programmable counters greater than 10
• Frequency dividers
• Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
• Time-delay circuits
• Dual Up Counters
• Up Counters
• Communications Digital Frequency Synthesizers;
• Frequency dividing circuits