CD74HC173E

CD74HC173E Overview

In the form of 16-DIP (0.300, 7.62mm), it has been packaged. Package Tubeembeds it. As configured, the output uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. A supply voltage of 2V~6V is required for operation. -55°C~125°C TAis the operating temperature. D-Typedescribes this flip flop. It belongs to the 74HCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 60MHz. D latch consists of 1 elements. There have been 16 terminations. The object belongs to the 74HC173 family. The D flip flop is powered by a voltage of 4.5V . There is 10pF input capacitance for this T flip flop. HC/UHis the family of this D flip flop. This electronic part is mounted in the way of Through Hole. With its 16pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. An electronic part with 4bits has been designed. The maximal supply voltage (Vsup) reaches 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Its output current of 7.8mAallows for maximum design flexibility. In order for the chip to function, it has 3output lines. This input has 2lines. Despite external influences, it consumes 8μAof quiescent current. Additionally, there are WITH DUAL OUTPUT ENABLE on the electronic flip flop that can be referred to. There are 4 channels available.

CD74HC173E Features

Tube package
74HC series
16 pins
4 Bits

CD74HC173E Applications

There are a lot of Texas Instruments CD74HC173E Flip Flops applications.

• Latch-up performance
• Dynamic threshold performance
• Automotive
• High Performance Logic for test systems
• Functionally equivalent to the MC10/100EL29
• Memory
• Patented noise
• ESD protection
• Registers
• Balanced Propagation Delays