CD74HC175M96

CD74HC175M96 Overview

The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. You can find it in the Tape & Reel (TR)package. There is a Differentialoutput configured with it. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. It is operating at a temperature of -55°C~125°C TA. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74HC series. In order for it to function properly, its output frequency should not exceed 35MHz. In total, it contains 1 elements. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. You can search similar parts based on 74HC175. A voltage of 4.5V is used as the power supply for this D latch. A JK flip flop with a 10pFfarad input capacitance is used here. Devices in the HC/UHfamily are electronic devices. This electronic part is mounted in the way of Surface Mount. It is designed with 16 pins. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. It is designed with a number of bits of 4. 6Vis the maximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 2V for normal operation. Its flexibility is enhanced by 4 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TR. A power supply of 2/6Vis required to operate it. With an output current of 5.2mA, it is possible to design the device in any way you want. In terms of quiescent current, it consumes 8μA .

CD74HC175M96 Features

Tape & Reel (TR) package
74HC series
16 pins
4 Bits
2/6V power supplies

CD74HC175M96 Applications

There are a lot of Texas Instruments CD74HC175M96 Flip Flops applications.

• Event Detectors
• Storage Registers
• Convert a momentary switch to a toggle switch
• Divide a clock signal by 2 or 4
• Data storage
• Common Clocks
• Counters
• Balanced Propagation Delays
• Single Up Count-Control Line
• Set-reset capability