CD74HC283MTE4

CD74HC283MTE4 Overview

This device is supplied in the SOIC package. In order to configure it, it uses 16terminations. With a supply voltage of 4.5V volts, it is possible to run it in a fully flexible manner. A total of 16pins are present on all components. As a result, it is packaged as Tape and Reel. Circuit components are connected by 16pins. The way of Surface Mount is used to mount it. Initially, it appears to belong to the HC/UH family. The device contains information consisting of 4bits. Based on the Pbfree code, the result may be yes. It is important to note that WITH FULL INTERNAL LOOKAHEADare really important features of this electronic device. There is a temperature grade of MILITARYon this device. Electrical characteristics are acceptable at extended periods of time at temperatures above [0]. Generally, the temperature limit is set at -55°Cso it will operate over a specified range. A maximum voltage of 6Vcan be reached by the device. The device can operate at as low a voltage as 2V. Quiescent current is consumed at 8μA. This electronic component is from the Arithmetic Circuits family. It uses the logic IC type [0]. A specified high-level voltage produces -5.2mAcurrent in the output. At low-level voltages, there is 5.2mA current flowing into the output terminal. In this case, 1channels are used to configure its basis.

CD74HC283MTE4 Features

Embedded in the SOIC package
WITH FULL INTERNAL LOOKAHEAD
ADDER/SUBTRACTOR as logic IC type

CD74HC283MTE4 Applications

There are a lot of Texas Instruments CD74HC283MTE4 Counters & Dividers applications.

• Divide-by-N counting
• VHF, UHF, FM, AM, etc.
• Timing applications
• Frequency dividers
• Binary counter/decoder
• Digital multiplexing and demultiplexing
• Decade counter/decimal decode display (CD4017B）
• Frequency division
• Divide-by"N" counters/frequency synthesizers
• Signal gating