CD74HC377M96G4

CD74HC377M96G4 Overview

In the form of SOIC, it has been packaged. The list contains 1 elements. Currently, there are 20 terminations. A voltage of 5V is used to power it. An electronic device belonging to the family HC/UHcan be found here. There is an electronic part mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. It consumes 8μA of quiescent current without being affected by external factors. Additionally, you may refer to the D latch's additional WITH HOLD MODE. A -5.2mAis set for the high level output current. In the low level output current setting, 5.2mAis used. If the operating temperature is lower than 125°C, it is recommended. The operating temperature should be higher than -55°C. In order for it to operate, a supply voltage of 2Vis required. 6Vis its maximum supply voltage. It is possible to obtain a frequency of 60MHz. It adopts a logic IC of type D FLIP-FLOP. A total of 1 functions are available on the T flip flop. The JK flip flop has a pin count of 20. Its output current of 5.2mA allows for maximum design flexibility.

CD74HC377M96G4 Features

20 pins
1 Functions
20 pin count

CD74HC377M96G4 Applications

There are a lot of Texas Instruments CD74HC377M96G4 Flip Flops applications.

• Latch-up performance
• EMI reduction circuitry
• Balanced 24 mA output drivers
• Set-reset capability
• Modulo – n – counter
• Clock pulse
• Buffer registers
• CMOS Process
• Memory
• Balanced Propagation Delays