CD74HC4024M

CD74HC4024M Overview

This device is supplied in the 14-SOIC (0.154, 3.90mm Width) package. The configuration of this device is based on 14terminations. With a supply voltage of 4.5V volts, it is possible to run it in a fully flexible manner. The 1elements are connected by wires. A total of 14pins are present on all components. As a result, it is packaged as Tube. To connect the circuit's other components, there are 14pins. Using [0], it can be mounted. In this case, it appears as a member of the HC/UH family. With its 74HCseries designation, it can be used for a range of applications. Binary Counteris used as the logic type. The operating temperature should be set at -55°C~125°C. The mounting type is Surface Mount. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. Each element in the array stores 7 bits. As far as Pbfree code is concerned, the result may be yes. Among its base part number [0], you will find additional parts that are related. From the voltage source, there is 2/6Vvoltage. The minimum supply voltage (Vsup) is as low as 2V. A frequency of 35MHzis used for operation. Depending on the device type, the maximum supply voltage (Vsup) can be up to 6V volts. As long as 8μAis maintained, it consumes quiescent current.

CD74HC4024M Features

Embedded in the 14-SOIC (0.154, 3.90mm Width) package
7 bits per element
Frequency of 35MHz

CD74HC4024M Applications

There are a lot of Texas Instruments CD74HC4024M Counters & Dividers applications.

• Fixed or Programmable Frequency Division
• ALGEBRAIC COMPUTATION
• LINEARIZATION
• Analog multiplexing and demultiplexing
• MULTIPLICATION
• DIVISION
• Communications Digital Frequency Synthesizers;
• SQUARE ROOT
• Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
• VHF, UHF, FM, AM, etc.