CD74HC4046AE

CD74HC4046AE Overview

Clock generator is packaged in the way of Tube. In the 16-DIP (0.300, 7.62mm) package, there is an embedded clock generator. As you can see, it consists of 16 terminations. Basically, a voltage of 3V should be applied to this electronic frequency generator. A clock generator's input is called CMOS and it is designed as the input for this clock generator. The Through Hole allows this electrical component to be easily installed on the panel. There is a maximum voltage of 6V for this clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 2V. As far as the supply voltage is concerned, clock PLL can be used with 2V~6V. The temperature should be set at -55°C~125°C to ensure reliable performance. Phase Lock Loop (PLL) is the type of electrical part that this component is classified as. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. Related electrical parts can be found for the base part number 74HC4046. There are 16 pins on the frequency generator that are available for use. In general, this clock PLL is considered a PLL or Frequency Synthesis Circuits device. There are a number of electronic parts in the 74HC series, including this one. At a frequency of 38MHz, the system can achieve high efficiency. The clock PLL here has 1 elements and has a very low jitter performance. During normal operation, the maximum supply current should not exceed 204mA.

CD74HC4046AE Features

Available in the 16-DIP (0.300, 7.62mm)
Supply voltage of 3V

CD74HC4046AE Applications

There are a lot of Texas Instruments CD74HC4046AE Clock Generators applications.

• Wireless infrastructure
• Test equipment
• High-speed communication applications
• Digital switching systems
• Jitter reduction
• Pulsed digital systems
• Pagers
• Clock synchronization
• PMR (Professional Mobile Radio)
• Digital HDTV systems