CD74HC4538E

CD74HC4538E Overview

The product comes in a 16-DIP (0.300, 7.62mm) case.As a precaution, it is advisable to pack the equipment in case something goes wrong.Multivibrator is recommended to mount Multivibrator on a Through Hole-axis.There are two logic types for this part, Logic Type A and Logic Type B.The vote is delivered within the zone 2V~6V.This electrical component is included in the 74HC series.A minimum operating temperature of -55°C~125°C must not be reached by this part.5.2mA 5.2mA's current output is low and its voltage output is high.As far as the design is concerned, the component is based on the 74HC4538 family of components.As a whole, it has 16 terminations.4.5V voltage can be handled by it.There is a 2 input for data or a clock input on this board.16 pins are present on the part in total.The HC/UH family is responsible for it.In this part, you can find 16 pins.Through Hole mounts the device on the wall.Minimum supply voltage must be greater than 2V for the supply voltage to be greater than 2V.Integrated circuit consumes quiescent current at 8μA.Integrated circuit is specified that the operating supply voltage for the chip is 5V volts.Chips like this one require 6V volts to run properly.Integrated circuit is possible for the device to output a current of 5.2mA as an output current.2 is the total amount of bits on an IC chip.Using the 0.08mA setting would be best for power supply current.

CD74HC4538E Features

in 16-DIP (0.300, 7.62mm) package
Mounting Type: Through Hole
Logic Type: Monostable
Operating Temperature: 74HC
based on 74HC4538
Supply Voltage: 4.5V
Quiescent Current at 8μA
output current at 5.2mA
2 bits

CD74HC4538E Applications

There are a lot of Texas Instruments CD74HC4538E applications of multivibrators.

• Desktop PCs or Notebook PCs
• Mobile Internet Devices
• Time-delay applications
• GPS: Personal Navigation Devices
• Frequency discriminators
• Personal Digital Assistant (PDA)
• Envelope detection
• Pulse shaping
• Astable multivibrator
• AV Receivers