CD74HC574E

CD74HC574E Overview

It is packaged in the way of 20-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. The output it is configured with uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. There is an electric part mounted in the way of Through Hole. The supply voltage is set to 2V~6V. In the operating environment, the temperature is -55°C~125°C TA. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74HC series. You should not exceed 60MHzin its output frequency. A total of 1 elements are present. A total of 20terminations have been recorded. The 74HC574family includes it. An input voltage of 4.5Vpowers the D latch. The input capacitance of this JK flip flopis 10pF farads. A device of this type belongs to the family of HC/UH. There is an electronic part that is mounted in the way of Through Hole. It is designed with 20 pins. This device exhibits a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. There are 8bits in this flip flop. As soon as Vsup reaches 6V, the maximum supply voltage is reached. The supply voltage (Vsup) should be kept above 2V for normal operation. The flip flop has 2embedded ports. With a current output of 7.8mA , it offers maximum design flexibility. In order to operate, the chip has 3 output lines. This input has 8lines. In terms of quiescent current, it consumes 8μA . A total of 2 channels are available.

CD74HC574E Features

Tube package
74HC series
20 pins
8 Bits

CD74HC574E Applications

There are a lot of Texas Instruments CD74HC574E Flip Flops applications.

• Data Synchronizers
• Power down protection
• Shift registers
• Safety Clamp
• Frequency Dividers
• Matched Rise and Fall
• Common Clocks
• Shift Registers
• Circuit Design
• Parallel data storage