CD74HC73M

CD74HC73M Overview

The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. D flip flop is embedded in the Tube package. Differentialis the output configured for it. There is a trigger configured with Negative Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. The operating temperature is -55°C~125°C TA. Logic flip flops of this type are classified as JK Type. JK flip flop belongs to the 74HCseries of FPGAs. There should be no greater frequency than 60MHzon its output. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. You can search similar parts based on 74HC73. A voltage of 4.5V is used as the power supply for this D latch. This JK flip flop has a 10pFfarad input capacitance. A device of this type belongs to the family of HC/UH. A part of the electronic system is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. It has a clock edge trigger type of Negative Edge. The part is included in FF/Latch. The maximal supply voltage (Vsup) reaches 6V. For normal operation, the supply voltage (Vsup) should be above 2V. This T flip flop features a maximum design flexibility due to its output current of 5.2mA. There is a consumption of 4μAof quiescent current from it. In addition, you can refer to the additinal MASTER SLAVE OPERATION of the D latch. 2 channels are available.

CD74HC73M Features

Tube package
74HC series
14 pins

CD74HC73M Applications

There are a lot of Texas Instruments CD74HC73M Flip Flops applications.

• Bounce elimination switch
• Balanced 24 mA output drivers
• Divide a clock signal by 2 or 4
• Instrumentation
• Counters
• Synchronous counter
• ESD performance
• Data transfer
• ESCC
• Memory