CD74HC74E

CD74HC74E Overview

The flip flop is packaged in a case of 14-DIP (0.300, 7.62mm). The package Tubecontains it. T flip flop is configured with an output of Differential. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. The JK flip flop operates at a voltage of 2V~6V. Currently, the operating temperature is -55°C~125°C TA. This D latch has the type D-Type. It is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 50MHz. There have been 14 terminations. The 74HC74 family contains it. The power supply voltage is 4.5V. This T flip flop has a capacitance of 10pF farads at the input. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. It is mounted by the way of Through Hole. Basically, it is designed with a set of 14 pins. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. As soon as Vsup reaches 6V, the maximum supply voltage is reached. The supply voltage (Vsup) should be kept above 2V for normal operation. With an output current of 5.2mA, this device offers maximum design flexibility. To operate, the chip has a total of 1 output lines. As a result, it consumes 4μA of quiescent current without being affected by external factors. There are 2 channels available.

CD74HC74E Features

Tube package
74HC series
14 pins

CD74HC74E Applications

There are a lot of Texas Instruments CD74HC74E Flip Flops applications.

• Patented noise
• Modulo – n – counter
• High Performance Logic for test systems
• Storage registers
• Differential Individual
• ESD performance
• Communications
• ESCC
• Balanced 24 mA output drivers
• Power down protection