CD74HC74MTG4

CD74HC74MTG4 Overview

It is embeded in SOIC case. It is contained within the Tape & Reel (TR)package. In total, it contains 2 elements. Terminations are 14. Power is supplied from a voltage of 4.5V volts. Electronic devices of this type belong to the HC/UHfamily. There is an electronic part that is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number FF/Latches. Flip flops designed with 1bits are used in this part. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The number of input lines is 1. It consumes a total of 4μA quiescent current at any given time. A high level output current of -5.2mAis set. There is no low level output current set at 5.2mA. Ideally, the operating temperature should be below 125°C. In order for the system to operate properly, the temperature should be higher than -55°C. Despite its minimal supply voltage of 2V, it is capable of operating. The maximum supply voltage supported by the flip flop is 6V. It is possible to achieve a frequency of 50MHz. This logic IC is D FLIP-FLOP. A total of 2 functions are available on the T flip flop. With 14 pins, it is equipped with a low power consumption. It features maximum design flexibility due to the 5.2mA output current.

CD74HC74MTG4 Features

Tape & Reel (TR) package
14 pins
1 Bits
2 Functions
14 pin count

CD74HC74MTG4 Applications

There are a lot of Texas Instruments CD74HC74MTG4 Flip Flops applications.

• Event Detectors
• Synchronous counter
• Latch-up performance
• ESD performance
• Cold spare funcion
• Individual Asynchronous Resets
• Divide a clock signal by 2 or 4
• Dynamic threshold performance
• High Performance Logic for test systems
• Counters