CD74HCT173M

CD74HCT173M Overview

The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. The package Tubecontains it. In the configuration, Tri-State, Non-Invertedis used as the output. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. -55°C~125°C TAis the operating temperature. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74HCT series. There should be no greater frequency than 60MHzon its output. D latch consists of 1 elements. Currently, there are 16 terminations. You can search similar parts based on 74HCT173. The D flip flop is powered by a voltage of 5V . This T flip flop has a capacitance of 10pF farads at the input. It is a member of the HCTfamily of D flip flop. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 16 pins. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. This flip flop is designed with 4 Bits. Its superior flexibility is attributed to its use of 4 circuits. The D latch operates on 5V volts. The supply voltage should be maintained at 5V for high efficiency. With an output current of 6mA, it is possible to design the device in any way you want. In order for the chip to function, it has 3output lines. Despite external influences, it consumes 8μAof quiescent current. Furthermore, it has WITH DUAL OUTPUT ENABLEas a characteristic.

CD74HCT173M Features

Tube package
74HCT series
16 pins
4 Bits
5V power supplies

CD74HCT173M Applications

There are a lot of Texas Instruments CD74HCT173M Flip Flops applications.

• Frequency Dividers
• Reduced system switching noise
• Storage Registers
• Balanced Propagation Delays
• Computing
• Data Synchronizers
• Balanced 24 mA output drivers
• Buffer registers
• ESCC
• Single Up Count-Control Line