CD74HCT175MG4

CD74HCT175MG4 Overview

The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tube. Differentialis the output configured for it. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. Currently, the operating temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. It is a type of FPGA belonging to the 74HCT series. There should be no greater frequency than 25MHzon its output. The list contains 1 elements. 16terminations have occurred. The 74HCT175family includes it. An input voltage of 5Vpowers the D latch. Its input capacitance is 10pFfarads. In terms of electronic devices, this device belongs to the HCTfamily of devices. It is mounted by the way of Surface Mount. This board has 16 pins. It has a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. The design is based on 4bits. It operates from 5V power supplies. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. There are 4 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. As a result, it consumes 8μA of quiescent current without being affected by external factors.

CD74HCT175MG4 Features

Tube package
74HCT series
16 pins
4 Bits
5V power supplies

CD74HCT175MG4 Applications

There are a lot of Texas Instruments CD74HCT175MG4 Flip Flops applications.

• Patented noise
• Shift registers
• Buffered Clock
• Supports Live Insertion
• ESD performance
• Frequency division
• Single Down Count-Control Line
• Latch-up performance
• Guaranteed simultaneous switching noise level
• Storage Registers