CD74HCT373M96G4

CD74HCT373M96G4 Overview

20-SOIC (0.295, 7.50mm Width) contains it. As a result, it has a packaging of Tape & Reel (TR). Tri-State is the output configured for it. This electrical device has the logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A voltage of 4.5V~5.5V is used as the supply voltage for this device. During operation, the temperature is set at -55°C~125°C. In the 74HCT series, this FPGA is located. There are 8 bits in this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to 74HCT373 family. In order to operate it, the supply voltage must be 5V. There are 20 pins on it. In the world of electronics, this electronic device belongs to the family of HCT. The 20 pins are designed into it. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports on board, which are all available at the same time. This part can be found within the Bus Driver/Transceiver subcategory. A total of 5V power supplies are required for it to operate. Based on its reliable performance, this device is appropriate for TR. It features maximum flexibility in design due to 6mA output current. If you want to achieve high efficiency, make sure the supply voltage is at 5V. 8 output lines generate the binary equivalent of the input lines. The quiescent current consumed by it is 8μA because it is unaffected by external factors. This element consists of 1.

CD74HCT373M96G4 Features

20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
1 elements

CD74HCT373M96G4 Applications

There are a lot of Texas Instruments CD74HCT373M96G4 Latches applications.

• Parallel data storage
• Multi-line decoders
• Buffer register
• Display driver
• Network Switches
• Shift Registers
• Avionics
• Shift right with parallel loading
• Phase comparator
• Relay