CD74HCT374E

CD74HCT374E Overview

It is embeded in 20-DIP (0.300, 7.62mm) case. It is contained within the Tubepackage. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. Through Holeis occupied by this electronic component. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. In this case, the operating temperature is -55°C~125°C TA. D-Typeis the type of this D latch. JK flip flop belongs to the 74HCTseries of FPGAs. In order for it to function properly, its output frequency should not exceed 60MHz. A total of 1elements are contained within it. There are 20 terminations,It is a member of the 74HCT374 family. It is powered by a voltage of 5V . A 10pFfarad input capacitance is provided by this T flip flop. In this case, the D flip flop belongs to the HCTfamily. There is an electronic part that is mounted in the way of Through Hole. With its 20pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part with 8bits has been designed. Despite its superior flexibility, it relies on 8 circuits to achieve it. There are 5V power supplies attached to it. The flip flop contains 2ports. Optimal efficiency requires a supply voltage of 5V. It offers maximum design flexibility with its output current of 6mA. It is designed with 3 output lines. There is a consumption of 8μAof quiescent current from it.

CD74HCT374E Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

CD74HCT374E Applications

There are a lot of Texas Instruments CD74HCT374E Flip Flops applications.

• Control circuits
• Data storage
• Modulo – n – counter
• Computing
• Bus hold
• Event Detectors
• Clock pulse
• Latch-up performance
• ESD protection
• Balanced Propagation Delays