CD74HCT4520M96

CD74HCT4520M96 Overview

A device of this type is supplied in a package of type [0]. For its configuration, 16terminations are used. 5Vis enabled to operate in an extremely flexible manner due to its supply voltage. The device contains 2terminations. A total of 16pins are present on all components. As [0], it is packaged. There are 16 pins going on to connect other parts in the circuit. To mount it, use the method of [0]. In this case, it appears as a member of the family [0]. As a member of 74HCT series, it is well suited for various applications. Logic type Binary Counter is adopted. Setting the operating temperature to -55°C~125°C is recommended. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. The array stores 4bits in each element. Based on Pbfree code, this may result in yes. It is important to note that NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLEare really important features of this electronic device. It should be noted that there are more related parts under the 74HCT4520base part number. It is packed using [0]. There is 5V voltage comes from the voltage source. It takes supply voltage of 5V to operate. Frequency 50MHzdetermines its operation. There is a quiescent current consumption at 8μA.

CD74HCT4520M96 Features

Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLE
Operating supply voltage of 5V
Frequency of 50MHz

CD74HCT4520M96 Applications

There are a lot of Texas Instruments CD74HCT4520M96 Counters & Dividers applications.

• Communications Digital Frequency Synthesizers;
• SQUARING
• Frequency dividers
• Time-delay circuits
• DIVISION
• VHF, UHF, FM, AM, etc.
• ALGEBRAIC COMPUTATION
• Control counters
• ANALOG SIGNAL PROCESSING
• Counter control/timers