CD74HCT534E

CD74HCT534E Overview

20-DIP (0.300, 7.62mm)is the way it is packaged. There is an embedded version in the package Tube. Currently, the output is configured to use Tri-State, Inverted. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. The operating temperature is -55°C~125°C TA. This D latch has the type D-Type. The 74HCTseries comprises this type of FPGA. It should not exceed 50MHzin terms of its output frequency. A total of 1 elements are present. Terminations are 20. The 74HCT534 family contains it. An input voltage of 5Vpowers the D latch. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. An electronic device belonging to the family HCTcan be found here. In this case, the electronic component is mounted in the way of Through Hole. A total of 20pins are provided on this board. This device's clock edge trigger type is Positive Edge. There is a Bus Driver/Transceiverbase part number assigned to the RS flip flops. The flip flop is designed with 8bits. It operates from 5V power supplies. A D flip flop with 2embedded ports is available. For high efficiency, the supply voltage should be kept at 5V. With a current output of 6mA , it offers maximum design flexibility. In order to operate, the chip has 3 output lines. As a result, it consumes 8μA of quiescent current without being affected by external factors. Currently, there are 8 channels available.

CD74HCT534E Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

CD74HCT534E Applications

There are a lot of Texas Instruments CD74HCT534E Flip Flops applications.

• Digital electronics systems
• Memory
• Individual Asynchronous Resets
• Pattern generators
• Automotive
• Load Control
• Shift Registers
• Asynchronous counter
• Latch-up performance
• Storage registers