CD74HCT563M

CD74HCT563M Overview

The 20-SOIC (0.295, 7.50mm Width) package contains it. A Tube package is used to package it. It is configured with an output of Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. The way in which this electronic part is mounted is Surface Mount. A 4.5V~5.5V voltage supply is required for operation. It operates at -55°C~125°C degrees Celsius. This FPGA is part of the 74HCT series. 8 Bits are used in the design of this electronic part. The device consists of 20 terminations that are designed to be used in conjunction with it. This type belongs to the 74HCT563 family. With the supply voltage set at 5V, it is able to operate. 20 pins are provided. In terms of electronic devices, this one is in the HCT family. In addition, it is designed with a pin number of 20. It is mounted according to the Surface Mount method. In this device, there are 2 ports. The part is in the FF/Latches subcategory. 5V power supplies are needed to operate it. Electronic circuits are represented by 8 input lines. As the output current is 7.8mA, the design flexibility is maximum. High efficiency requires a voltage supply of 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. The quiescent current consumed by it is 8μA because it is unaffected by external factors.

CD74HCT563M Features

20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT563 family
20 pin count
20 pins
5V power supplies

CD74HCT563M Applications

There are a lot of Texas Instruments CD74HCT563M Latches applications.

• Bus system register with enable parallel lines at bus side
• OC-48 communication systems
• Four-bit storage with output enable
• Counters
• Buffer register
• Programmable binary
• Shift left register
• Flip-flops
• Automotive Infotainment
• Data acquisition