CD74HCT574ME4

CD74HCT574ME4 Overview

20-SOIC (0.295, 7.50mm Width)is the way it is packaged. D flip flop is included in the Tubepackage. This output is configured with Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountmounts this electrical part. A supply voltage of 4.5V~5.5V is required for operation. It is operating at -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. Its output frequency should not exceed 60MHz Hz. D latch consists of 1 elements. Terminations are 20. The 74HCT574family includes it. A voltage of 5V provides power to the D latch. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of HCT. The electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. In this device, the clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. This flip flop is designed with 8 Bits. In order to achieve its superior flexibility, 8 circuits are used. In order for the device to operate, it requires 5V power supplies. This D flip flop is equipped with 0 ports. If high efficiency is desired, the supply voltage should be kept at 5V. The JK flip flop is with 3 output lines to operate. It consumes 8μA current.

CD74HCT574ME4 Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

CD74HCT574ME4 Applications

There are a lot of Texas Instruments CD74HCT574ME4 Flip Flops applications.

• ATE
• Clock pulse
• Balanced Propagation Delays
• Parallel data storage
• Data transfer
• Divide a clock signal by 2 or 4
• Frequency Divider circuits
• Automotive
• ESD performance
• Consumer