CD74HCT574QPWRG4Q1

CD74HCT574QPWRG4Q1 Overview

The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. The Tape & Reel (TR)package contains it. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. A supply voltage of 4.5V~5.5V is required for operation. Temperature is set to -40°C~125°C TA. D-Typedescribes this flip flop. The FPGA belongs to the Automotive, AEC-Q100, 74HCT series. You should not exceed 60MHzin the output frequency of the device. The list contains 1 elements. There are 20 terminations,You can search similar parts based on 74HCT574. A voltage of 5V is used as the power supply for this D latch. Input capacitance of this device is 10pF farads. It is a member of the HCTfamily of D flip flop. The electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latches. It is designed with 8bits. This D flip flop is well suited for TR based on its reliable performance. The system runs on a power supply of 5V watts. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. 8input lines are available for you to choose from. Despite external influences, it consumes 8μAof quiescent current.

CD74HCT574QPWRG4Q1 Features

Tape & Reel (TR) package
Automotive, AEC-Q100, 74HCT series
20 pins
8 Bits
5V power supplies

CD74HCT574QPWRG4Q1 Applications

There are a lot of Texas Instruments CD74HCT574QPWRG4Q1 Flip Flops applications.

• Power down protection
• Communications
• Parallel data storage
• Matched Rise and Fall
• Synchronous counter
• Instrumentation
• Memory
• Modulo – n – counter
• Data transfer
• Pattern generators